12 CROSS-LAMINATED (CLT) - PRESSES With our cross-laminated timber presses (CLT presses) of the TimberPress X series, we offer the ideal press technology for the production of cross-laminated timber elements from crosswise glued solid wood layers. The solid wood layers can consist of joint-glued solid wood boards or loose lamellas/boards. Depending on the application, we use one of the following three series. With the TimberPress X 100 we press joint-glued solid wood boards into CLT press blanks, whereby the main press pressure is applied vertically. We use the version TimberPress X 100 pro if joint-glued solid wood boards have already been produced in the previous production step and if they also have window and/or door cut-outs. The TimberPress X 200 has a frontal or lateral hydraulic compression function in addition to the vertical main press pressure. Thus, the length or cross layers can consist of loose lamellas/panels and the process step "joint gluing / solid wood board production" is dropped for a part of the raw material. With the TimberPress X 300 we compress both length and cross layers before pressing high-quality CLT boards with the vertical main press pressure. Both the length and the cross layers consist of loose lamellas/panels. The process step "joint gluing / solid wood panel production" is thus completely dropped. As an option, all three series are also available as a high-speed version (HS). In the HS version, the opening and closing of the press as well as its feeding and unloading is done at a significantly higher speed. This enables the use of even faster PUR glues for shorter cycle times, and capacity increases of up to 30 % can be achieved. Timber Press X 100: Vertical main press pressure TimberPress X 100 pro: Vertical main press pressure with targeted adaptation to the board contour TimberPress X 200: Vertical main press pressure and horizontal compression TimberPress X 300: Vertical main press pressure and compression in length and cross direction
RkJQdWJsaXNoZXIy NzQ0Mjg=